Product Details:
Payment & Shipping Terms:
|
| Product Name: | Semi-rigid Irradiated Heat Shrinkable Polyolefin (PO) With Meltable Adhesive Liner 12.0mm Black | Working Temperature: | -45C - 125C |
|---|---|---|---|
| Shrink Temperature: | 70C - 125C | Shrink Ratio: | 4:1 |
| Size: | 6.0mm - 18.0mm | Color: | Black, Red, Yellow, Green, Blue, Transparent |
| Property: | Insulation, Waterproof, Sealing, Flame Retardant | Application: | Automobile And Marine Wire Harness, Breakouts |
| High Light: | heat shrink tube,heat shrinkable sleeves |
||
Polyolefin PO heat shrink sleeve with Meltable Adhesive Liner
Model number: SB-SBRS-(4X) GR
Working temperature: -45ºC ~ 125ºC
Shrink temperature: 70ºC ~ 125ºC
Shrink ratio: 4:1
Structure:
Semi-rigid Irradiated Heat Shrinkable Polyolefin (PO) with Meltable Adhesive Liner 12.0mm Black adopts flame retardant, cross-linked polyolefin material with an inner coating of hot-melt adhesive and outer layer that shrinks to provide electrical and mechanical protection. The outer layer has excellent insulation, wear and corrosion resistant performance. The inner layer has the excellence of low melt point and waterproof etc. It has passed UL, RoHS, Reach certifications with 600V/300V.
Usage:
Semi-rigid Irradiated Heat Shrinkable Polyolefin (PO) with Meltable Adhesive Liner 12.0mm Black allows a few sizes to cover a wide range of splices and component diameters, mechanically tough tubing provides strain relief and abrasion protection of wire splices, terminals, and other components, adhesive-lined against fluids, moisture and other contaminants.
Standards:
Production standards: UL224, CAN/CSA C22.2 NO198.1-99
Features:
4:1 very high shrink ratio
Technical data:
| Property | Test Method | Standard |
| Tensile strength(MPa) | ASTM D2671 | ≥12 |
| Elongation | ASTM D2671 | ≥300 |
| Tensile strength after aging(MPa) | UL224 158C*168hrs | ≥7.3 |
| Elongation after aging(%) | UL224 158C*168hrs | ≥200 |
| Dielectric strength(KV/mm) | IEC243 | ≥15 |
| Volume resistivity(Ω.cm) | ASTM D876 | ≥1*1014 |
Hot melt adhesive property:
| Property | Test Method | Standard |
| Water absorption | ASTM D570 | ≤0.2% |
| Softening point | ASTM E8 | 95C |
| Strength of pearing(PE) | ASTM D1000 | 120N/25mm |
| Strength of pearing(AL) | ASTM D1000 | 80N/25mm |
Dimension:
| Inner Diameter | As Supplied(mm) | After Recovery(mm) | Standard Length | ||||
| (inch) | (mm) | ID | Max ID | Whole Wall Thickness | Adhesive Thickness | (m/roll) | (m/pc) |
| 1/4 | φ6.0 | 6.0 | 1.27 | 1.26±0.30 | 0.50±0.30 | 100 | — |
| 5/16 | φ8.0 | 8.0 | 1.65 | 1.70±0.30 | 0.75±0.30 | 100 | — |
| 1/2 | φ12.0 | 12.0 | 2.41 | 2.10±0.30 | 0.95±0.30 | — | 1.22 |
| 3/4 | φ18.0 | 18.0 | 4.45 | 2.60±0.30 | 1.30±0.30 | — | 1.22 |
Color: Standard color is black (other color available upon request).
Semi-rigid Irradiated Heat Shrinkable Polyolefin (PO) with Meltable Adhesive Liner 12.0mm Black
